Publicidad
A
Nomenclature of parts
NAVAHO BOD
13
6
8
11
13
10 / 10 b
(EN) Nomenclature
of parts
- Chest harness:
(1) EN 361 dorsal attachment
point, (2) Adjustment buckle
of the dorsal attachment
point,
(3) EN 361 sternal attachment
point, (4) Directional
connector.
- Seat harness:
(5) Ventral point (textile)
connecting the chest harness
to the seat harness, (6) Belt,
(7) EN 358, EN 813, ventral
attachment point, (8) EN 358
lateral belt attachment points,
(9) Rear buckle joining chest
and seat components with
EN 358 restraint attachment
point, (10) DoubleBack
adjustment buckles,
(10 b) FAST rapid buckles,
(11) Equipment loop,
(12) Slot for tool carrier,
(13) Strap retainer,
(14) Elasticized straps,
(15) Label with markings
that stows in the waist belt
support.
Principal materials
Polyester (straps), steel
(adjustment buckles),
aluminum alloy (attachment
points, connector).
2
NAVAHO BOD / NAVAHO BOD FAST
A
13
1
13
10
3
A
4
5
7
8
13
11
10 / 10 b
Only the techniques shown in the diagrams that
are not crossed out and/or do not display a skull
and crossbones symbol are authorized. Check
our Web site www.petzl.com regularly to find the
latest versions of these documents.
Contact PETZL if you have any doubt or difficulty
understanding these documents.
Field of application
Fall arrest harness, work positioning belt, seat
harness.
This product must not be loaded beyond its
strength rating, nor be used for any purpose
other than that for which it is designed.
WARNING
Activities involving the use of this equipment
are inherently dangerous.
You are responsible for your own actions and
decisions.
Before using this equipment, you must:
- Read and understand all instructions for use.
- Get specific training in its proper use.
- Become acquainted with its capabilities and
limitations.
- Understand and accept the risks involved.
Failure to heed any of these warnings may
result in severe injury or death.
Responsibility
WARNING, specific training is essential before
use.
This product must only be used by competent
and responsible persons, or those placed under
the direct and visual control of a competent and
responsible person.
Gaining an adequate apprenticeship in
appropriate techniques and methods of
protection is your own responsibility.
You personally assume all risks and
C715060A (240810)
1
2
15
9
8
12
13
11
14
NAVAHO BOD FAST
10 b : FAST rapid buckles
responsibilities for all damage, injury or death
which may occur during or following incorrect
use of our products in any manner whatsoever. If
you are not able, or not in a position to assume
this responsibility or to take this risk, do not use
this equipment.
Inspection, points to verify
Before each use
Harness
Check the webbing at the attachment points,
at the adjustment buckles and at the safety
stitching.
Look for cuts in the webbing, wear and damage
due to use, to heat, and to contact with chemical
products, etc. Be particularly careful to check for
cut threads.
Verify that the DoubleBack and FAST buckles
operate properly.
Directional connector
Make sure the body, gate, and locking sleeve
are free of any cracks, deformation, corrosion,
etc. Open the gate and verify that it closes itself
automatically when released. Verify that the
locking sleeve operates properly. The Keylock
slot (gate) must not be blocked by any foreign
matter (dirt, pebble, etc.).
During each use
It is important to regularly inspect the condition
of the product. Check its connections with the
other equipment in the system and make sure
that the various pieces of equipment in the
system are correctly positioned with respect to
each other.
Consult the details of the inspection procedure
to be carried out for each item of PPE on the
Web at www.petzl.com/ppe or on the PETZL
PPE CD-ROM.
Contact PETZL if there is any doubt about the
condition of this product.
Publicidad
