Babyauto More ZITI FIX 123 Manual De Instrucciones página 21

3. Replace the booster's cover in its original position, fixing the Velcro to
ensure that it does not come loose, and again passing the safety buckle
(06) through the same buttonhole in the coveri (fig. 6). The belt must
remain under the cover.
4. Connect the vehicle's safety belt to the buckle, ensuring that you hear a
"Click" (fig. 7) and tauten the diagonal portion of the belt to ensure the
lap belt's maximum tension.
fig. 6
40
fig. 7
ClICK
5. Pass the belt through the upper portion of the back of the child seat
(fig. 8). Make sure to pass the belt through the belt guide on each side.
6. Pull the diagonal portion of the belt in order to reduce any openings
that may remain after prior installation (fig. 9).
fig. 8 fig. 9
41