General Information; Description Of Manufacturer And Product; Basic Assembly Principles - Aprimatic ZT60 Instrucciones Para La Instalación

R
1.2

DESCRIPTION OF MANUFACTURER AND PRODUCT

This manual relates to ZT60 - ZT62 - ZT64 automatic barriers and relative optional accessories for controlling
access to car parks and private entrances.
The identifi cation plates are fi tted on the hydraulic piston, on the hydraulic control unit and inside the case.
They indicate the following:
A - Manufacturer
GSG INTERNATIONAL S.p.A.
Via Tubertini 1
40054 Budrio - Bologna - Italy
Tel.(+39) 051 8850500 - Fax (+39) 051 8850501
B - Conformity mark
C - Model
D - Type of hydraulic oil (HC13)
E - Power supply voltage
F - Power supply frequency
G - Power absorbed
H - Beam stop torque
L - Rotation speed
M - Pump capacity
N - Maximum oil pressure
P - Functioning/delay time
Q - Control unit electric motor protection class
Check that the model code on the pack is the same as on the plate on the jack.
6 0
Z T
1.3

BASIC ASSEMBLY PRINCIPLES

The Aprimatic ZT60/ZT62/ZT64 automatic barrier must be installed on the entrance way with the operators (when using a double system)
positioned on the sides of the entrance way and the beams towards the outside of the private area. Establish the operator model by
following the diagram and relative table.
Information
The barrier is defi ned as a right barrier if the spring remains on the left when the inspection port is opened (the beam turns
in an anti-clockwise direction).
The barrier is defined as a left barrier if the spring remains on the right when the inspection port is opened (the beam turns in a
clockwise direction).
Information
The operating length of the beam is obtained by subtracting
the part occupied by the upright from the length of the beam
(B = A - C).
RIGHT
ZT 60 DX
S.p.A
C
Type
D Aprim OIL
~
E
230 V
F 50 Hz
250 W
G
0000 NR.00000000000 S 0000000
Operator
ZT60
ZT60
ZT64
WAY OUT
- 13 -

General information

A
B
MADE IN ITALY
ZT 60
AT 60
C.I. F H
230 Nm 1,34 g/min L
45 BAR 1 L/min
M
20 s/ 5 s IP 53
N P Q
Beam lenght (A)
metres
2 2,5 3 3,5 4 4,5 5 5,5 6 6,5
- x x x x
- - - - -
x x - - - - - -
x x
- x x - -
-
A
C
LEFT
A
C
ZT62/ZT64
Beam profile C
mm mm
100 x 50 352,5
- -
90 x 25 300
- -
90 x 25 300
B
ZT60
B