Technical Information; General Description; Technical Specifications And Dimensions; Tools Required - Aprimatic ZT60 Instrucciones Para La Instalación

Technical information

2.1

GENERAL DESCRIPTION

This manual relates to the APRIMATIC ZT60-ZT62-ZT64 operator.
– The ZT series hydraulic system is dedicated to the maintenance of beams for controlling access to car parks and private entrances. It allows
for smooth and regular movement of the beam, thanks to a helical spring balancing device. It is silent, economic and reliable.
– The presence of a double hydraulic block means the beam can rest in any position: open, closed and all positions in between.
– If the electric power supply is cut off, a simple release system allows the beam to be moved manually and, if necessary, the beam
can be blocked in the required position.
– The anti-crush safety system is guaranteed by a sensitive by-pass valve pair which stop the beam immediately as soon as it
comes into contact with any obstacle.
– The Aprimatic barriers are manufactured in light, robust aluminium, white, stove-enamelled, and then fi nished with red refl ector
stripes to guarantee maximum visibility in all light conditions.
– Special and exclusive treatment of the structural and external parts ensure that the system is resistant to all environmental
and atmospheric conditions.
– The various system models, designed to meet all specifi c installation requirements and to satisfy the needs of the most demanding
users, are as follows:
ZT60 is recommended to control long beams (from 4.5 to 6.5 metres), when continuous use is not required. It takes approximately
11 seconds to fully open the beam.
ZT62 is recommended to control short beams (up to 2.5 metres) for intensive use. This model takes only 2 seconds to fully open the beam.
Therefore, this model is ideal for car parks, shopping centres and industrial areas.
ZT64 is recommended to control medium-length beams (up to 4.5 metres) for intensive use. This model takes 5 seconds to fully open the
beam. Therefore, this model is ideal for condominiums, camping sites and industrial areas. Furthermore, with the application of the articulated
beam, the system can easily be used in closed areas and garages.
2.2

TECHNICAL SPECIFICATIONS AND DIMENSIONS

Characteristics ZT60
230V ±10%
Power supply
50 Hz
Power absorbed
250W
Current absorbed
1,6A
90°C
Overload device
Operating
-20/+70°C
temperature
Weight with oil 85kg.
Quantity of oil 1,5 l
AprimOil
Type of oil
Hc 13
1100
75,5
11
225
405
2.3

TOOLS REQUIRED

The following tools are required to fi t the device:
A - Electric drill
B - Drill bits
C - Hand-saw
D - Spirit level (three-dimensional)
E - Plumb line
F - Dynamometer
G - Graphite grease + brush
H - Combined wrench series
L - Set of Allen keys
M - Hammer
2.4

NOTE

ZT62 ZT64
230V ±10% 230V ±10%
50 Hz 50 Hz
250W 250W
1,6A 1,6A
90°C
90°C
-20/+70 -20/+70°C
50kg. 50kg.
1,5 l 1,5 l
AprimOil AprimOil
Hc 13 Hc 13
100
910
50
ZT 60
- 14 -
Characteristics ZT60
45 bar max
Maximum pressure
Pump capacity 1,0 l/min
Rotation angle
90°
Opening time 11s
5,00m
Beam minimum
length maximun 6,50m
400x1100x220
Upright dimensions
mm
LxHxW
1000
19
59
201
302
A
B
C
D
L
M
ZT62
ZT64
45 bar max 45 bar max
1,0 l/min 1,0 l/min
90° 90°
2s 5s
2,00m 2,00m
2,50m 4,50m
300x1000x200 300x1000x200
mm mm
90
14
843
25
ZT 62/ZT64
H
F
G R EAS E
G
R
E