Anti-Tips; Oxygen Tank Holder - Ki Mobility Liberty FT Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR
R. Anti-Tips
1. Flipping Anti-Tips Up
a. Depress buttons (Fig. 32:A) on anti-tips.
b. Flip anti-tips up until the depressed buttons click into the hole on the bottom of the
receiver.
2. Removing Anti-Tips
a. Depress buttons (Fig. 32:A) on anti-tips.
b. Pull anti-tip straight back to remove anti-tip from receiver.
c. To reinstall, press buttons in and push anti-tips back into receivers, aligning holes in
receiver with front detent button.
3. Setting for Seat Height
a. Depress lower button (Fig. 32:B) on anti-tip.
b. Pull anti-tip down or up to the height desired.
c. Ensure lower button clicks into one of the height setting holes.
d. Repeat for opposite side of chair. Ensure anti-tips on both sides of chair are set up identi-
cally.
S. Oxygen Tank Holder
WARNING: Oxygen tanks can be dangerous if not used properly. Ensure you have been
provided proper instructions for using an oxygen tank by the supplier of your tank. You must
heed all warnings and follow all instructions for use that have been provided by the supplier of
your oxygen tank. Failure to follow all the instructions for use, and heed all warnings, for oxygen
tanks can result in serious injury or death.
1. Instructions for Use:
This oxygen tank holder has been designed to secure D cylinders to your wheelchair. Make sure
that the bottle is well seated in the bottom of the holder and that the clamp is tightened to the
point that the cylinder cannot be pulled out.
Oxygen tanks can be dangerous, make sure you follow all instructions for use from the tank's
provider.
A
B
29
Fig. 32