Bb. Anti-Tips - Ki Mobility Little Wave Clik XP Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR
CC. Anti-Tips
Anti-tip tubes help prevent your wheelchair from tipping over backwards. When adjusted properly
they provide a significant increase in rearward stability. Your stability can be affected by traversing
uneven ground, a ramp, slope or other surface that changes your relationship to gravity. Your
stability can also be affected by other forces acting on you and your wheelchair such as someone
pushing down or leaning on your push handles or other parts of your chair. This can happen to
even the most experienced wheelchair user. People in your environment do not necessarily
understand they are impacting your stability.
Ki Mobility strongly recommends the use of Anti-Tip tubes!
WARNING: Anti-tips must be used at all times. Whether traversing uneven ground or sitting in
a crowded room, the unexpected may occur and your weight can dramatically shift causing a fall
which could cause serious injury or death.
1. Installing Anti-Tips (Fig. 38)
a. Press the rear anti-tip release pin on the anti-tip tube so both release pins are drawn inside.
Insert the anti-tip tube into receiver mounted on the camber tube.
b. Insert into the anti-tip tube receiver.
c. Turn the anti-tip tube down until release pin is positioned through the receiver mounting
hole.
d. Insert second anti-tip tube the same way.
Fig. 38
44