Leveling - Maytag MDE18PD Instrucciones De Instalación

Leveling your dryer properly reduces excess noise and vibration.
1. Remove cardboard from beneath dryer. Place a level on top
edges of dryer, checking each side and front. If not level, tip
dryer and adjust legs up or down as shown in Step 3, repeating
as necessary.
Not Level LEVEL Not Level
2. Grip dryer from top and rock back and forth, making sure all four
legs are firmly on floor. Repeat, rocking dryer from side to side.
If dryer rocks, go to Step 3 and adjust leveling legs.
3. If dryer is not level, use a 25 mm or 1" open-end or adjustable
wrench to turn the leveling leg counterclockwise to lower the
dryer or clockwise to raise the dryer. Recheck levelness of dryer
and that all four legs are firmly in contact with the floor. Repeat
as needed.
HELPFUL TIP: You may want to prop up front of dryer about
102 mm (4") with a wood block or similar object that will support
weight of dryer.

LEVELING

17