Total Station / Controller Is Not In Working Order; Manufacturer's Warranty - Hilti POS 150 Manual De Instrucciones Original

Cleaning the lens
ATTENTION
Risk of damage The optical system may be damaged by touching the parts.
▶ Do not touch the glass surfaces with your fingers.
▶ Blow any dust off the glass.
▶ Use only a soft, clean cloth to clean the tool.
7.2 Hilti Measuring Systems Service
Hilti Measuring Systems Service checks the scanning tool and, if deviations from the specified accuracy are
found, recalibrates it and rechecks to ensure conformity with specifications. The service certificate provides
written confirmation of conformity with specifications at the time of the test. The following is recommended:
• Choose a test/inspection interval that matches usage of the device.
Have the product checked by Hilti Measuring Systems Service after exceptionally heavy use or subjection
•
to unusual conditions or stress, before important work or at least once a year.
Testing and inspection by Hilti Measuring Systems Service does not relieve the user of the obligation to
check the scanning tool before and during use.
8 Troubleshooting
8.1

Total station / controller is not in working order

Trouble or fault
The tool can't be switched
on.
9 Disposal
WARNING
Risk of injury. Hazards presented by improper disposal.
▶ Improper disposal of the equipment may have the following consequences: The burning of plastic
components generates toxic fumes which may present a health hazard. Batteries may explode if
damaged or exposed to very high temperatures, causing poisoning, burns, acid burns or environmental
pollution. Careless disposal may permit unauthorized and improper use of the equipment. This may
result in serious personal injury, injury to third parties and pollution of the environment.
Most of the materials from which Hilti products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to Hilti for recycling. Ask Hilti Service or your Hilti sales representative for further information.
In accordance with the European Directive on waste electrical and electronic equipment and its implemen-
tation in conformance with national law, electric tools or appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.
▶ Disposal of electric tools or appliances together with household waste is not permissible.
10

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
2035736
*2035736*
Printed: 08.05.2018 | Doc-Nr: PUB / 5153826 / 000 / 04
Possible cause
The battery is discharged or not
correctly inserted.
Action to be taken
▶ Change the battery and charge
the empty battery.
▶ Insert the battery correctly.
▶ Contact HILTI service.
English 27