Technical Data - Hilti POS 150 Manual De Instrucciones Original

USB socket (master)
%
3.4 POC 200 4
Key
Touchscreen
@
LED display
;
Microphone
=
Eye for theft protection
%
Brightness sensor
&
3.5 Connector side of the POC 200
HDMI socket
:
Headset socket
∙
Docking connector
$
3.6 Underside, POC 200
Holder for stylus/pen
Q
Camera and flash
W
3.7 Intended use
The tool is designed for measuring distances and directions, calculating target positions in three dimensions
and the values derived from these positions and for laying out points using given coordinates or values
relative to a control line. Observe the information printed in the operating instructions concerning operation,
care and maintenance.
Take the influences of the surrounding area into account. Do not use the machine where there is a risk of fire
and explosion.
Modification of the tool is not permitted.
3.8 Description of the tool
The Hilti POS 150/180 total station can be used to define objects as dynamic positions within a given space
or area. The tool is equipped with horizontal and vertical circles with digital graduation, two electronic levels
(compensators), a coaxial electronic distance meter (EDM) incorporated in the telescope and an electronic
processor system for calculating and saving data.
The built-in target acquisition system allows prisms to be targeted automatically and their positions tracked
even when they move. The prism's position is determined continuously and processed in the application on
an ongoing basis. The total station is operated using the POC 100 or POC 200 controller.
Hilti PROFIS Layout, a PC application provided by Hilti, can be used to transfer data in both directions
between the total station and a PC, for data processing and for exporting data to other systems. Data can
also be transferred directly from the controller to a USB data storage device.
4

Technical data

4.1 Telescope (POS 150/180)
Telescope magnification
Shortest target distance
Telescope angle of view
Lens aperture
Minimum focus distance
2035736
*2035736*
Printed: 08.05.2018 | Doc-Nr: PUB / 5153826 / 000 / 04
5
6
USB socket (slave)
&
4-way controller and OK button
(
4 function buttons
)
Loudspeaker
+
Display lock
§
On/off switch
/
Socket for the docking station
£
USB port
|
Connection for power supply
¡
Batteries
E
Battery charge status indicator
R
31 x
1.5 m
(4 ft - 11 in)
1° 30'
50 mm
(2.0 in)
1.5 m
(4 ft - 11 in)
English 19