Ingeteam INGECON SUN STORAGE 1Play TL M Manual De Instalacion Y Uso página 25

Connection/disconnection of wiring in push-in type terminals
2. Insert the wiring.
3. Remove the screwdriver.
4. Check that the connection is tight.
Disconnecting the wiring
Follow the steps below to disconnect the wiring from these terminals:
1. Insert the flat-head screwdriver in the specified slot.
2. Remove the wiring.
3. Remove the screwdriver.
ABH2014IQM01_A - Installation and Operation Manual
Ingeteam
EN
ES
FR
PT
25