Attaching The Adjusting Rail To The Furniture Door - Thermador T18 Serie Instrucciones De Instalación

21. Attaching the adjusting rail to the
furniture door
• Loosen the 2 nuts and remove the adjusting rail.
The adjusting rail is the most important means of adju-
sting the furniture front.
4x15
Unscrew the installation support part from the appliance
door.
Store the positioning aids, there will be used in an
installation step later.
• Mark this amount X on the rear of the furniture door.
• Determine and mark the centerline of the furniture door.
• Put on the adjusting rail and align along the marks.
Mark the drill holes.
• Drill the holes.
• Screw on the adjusting rail tightly.
Notes:
- Attach the adjusting rail to the furniture door with at least
6 screws. One screw should be inserted under each
double threaded bolt.
18"
24"
"k
6x
6x
30"
lOx
_
Wine unit)
The adjusting rail features a variety of holes for the many
different design options of furniture doors. Always screw
into the best load-bearing material of the furniture door.
• Measure the distance X between the adjusting rail and
the overhead furniture/fixtures.
32