Adjusting The Door Opening Angle; Changing The Door Spring - Thermador T18 Serie Instrucciones De Instalación

30. Adjusting the door opening angle
Depending on the installation situation, it may be necessary
to adjust the door opening angle. A door opening angle of
115 ° has been set at the factory.
To adjust the door opening angle to 90°:
• Open door to 90 °.
31. Changing the door spring
Insert the banking pin through the boreholes which are
now vertically aligned and drive in with a hammer.
Rotate the adjusting screw with a cross-head
screwd river.
I = maximum spring tension
0 = no spring tension
4O