Descargar Imprimir esta página
DSC iotega Guía De Usuario De Inicio Rápido
Ocultar thumbs Ver también para iotega:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Quick Start User Guide/Guide de démarrage rapide/Guía de usuario de inicio rápido
To download the full installation and user manuals and register your product, please visit:
www.DSC.com/m/29009891 or scan the QR code to the right.
Status LED
Power
Ready
Armed
Trouble
Wi-Fi
Signal Strength
Cellular
Signal Strength
Remote Connection
Notes:
During a system test, all LEDs flash at the same time.
l
During an installer walk test, the Ready, Trouble, and Armed LEDs flash at the same time.
l
If the Remote Connection status LED flashes red, the server may be undergoing maintenance or experiencing technical difficulties. If the prob-
l
lem persists, contact your installer.
For more detailed descriptions of the panel indicators, refer to the iotega Self-Contained Wireless Security System User Manual.
l
Observe all safety, cleaning, and maintenance instructions specified in the user manual.
l
29009890R002
Panel indicators
Description
ON (green): AC power is connected to the system.
Flashing (green): System test is in progress.
OFF: There is no AC to the system.
ON (green): The system is ready to arm and there are no fire or CO alarm conditions.
Flashing (green): System test is in progress, installer walk test is in progress.
OFF: The system is not ready to arm because a zone is not secure, or a fire or CO alarm condition is present.
ON (red): The partition is armed.
Flashing (red):
The system is in alarm.
l
System test is in progress.
l
Installer walk test is in progress.
l
OFF: The partition is disarmed.
ON (amber): A system trouble is present.
Single flash (amber): The system is in the first level trouble menu [*][2].
Double flash (amber): The system is in the second level sub-menu.
Triple flash (amber): The system is in the third level sub-menu.
Flashing (amber):
Enter your access code to view troubles.
l
System test is in progress.
l
Installer walk test is in progress.
l
OFF: There are no system troubles.
ON:
Green: The radio is active with strong signal strength.
l
Amber: The radio is active with weak signal strength.
l
Red: There is no signal.
l
Flashing:
Green: The radio is active in Wi-Fi protected setup (WPS) mode.
l
Amber: Z-Wave radio is active in learn pair mode, system test is in progress.
l
OFF: The radio is inactive or not connected to the network.
ON:
Green: Cellular is active with strong signal strength.
l
Amber: Cellular is active with weak signal strength.
l
Red: A communicator is installed but there is no signal or connection.
l
Flashing (amber): System test is in progress.
OFF: A communicator is not installed or not configured.
ON (green): The link is active with a server.
Flashing (red): The link is active, but is not connecting with a server.
Flashing (amber): System test is in progress.
OFF: The link is not yet active with any server.

Publicidad

loading

Resumen de contenidos para DSC iotega

  • Página 1 If the Remote Connection status LED flashes red, the server may be undergoing maintenance or experiencing technical difficulties. If the prob- lem persists, contact your installer. For more detailed descriptions of the panel indicators, refer to the iotega Self-Contained Wireless Security System User Manual. Observe all safety, cleaning, and maintenance instructions specified in the user manual.
  • Página 2 PRIVACY STATEMENT: The Tyco cloud collects the following Data from the iotega panel (public IP address, security events and statuses, security configuration, and system diagnostics) in order to [improve system performance, troubleshoot customer issues, and improve user experience ]. You have the right to access, correct and request removal of your personal data by contacting info@tycosecurityproducts.com and the right to lodge a complaint with a supervisory authority.
  • Página 3 Si le voyant lumineux d’état de connexion à distance clignote, le serveur est peut-être en maintenance ou rencontre des difficultés tech- niques. Si le problème persiste, contactez votre installateur. Pour une description plus détaillées des indicateurs de la centrale, reportez-vous au iotega manuel de l’utilisateur du système de sécurité sans fil et d'automatisation.
  • Página 4 DÉCLARATION DE CONFIDENTIALITÉ : le Cloud Tyco collecte les données suivantes à partir de la centrale iotega (adresse IP publique, événements et états de sécurité, configuration de sécurité et diagnostics du système) afin [d’améliorer les performance du système, résoudre les problèmes rencontrés par l’utilisateur et améliorer l’expérience utilisateur]. Vous avez un droit d’accès, de correction et de demande de suppression de vos informations personnelles en nous contactant à...
  • Página 5: Indicadores Del Panel

    Guía de usuario de inicio rápido Para descargar la instalación completa y los manuales de usuario y registrar su producto, visite: www.DSC.com/m/29009783 o escanee el código QR a la derecha. Indicadores del panel LED de estado Descripción ENCENDIDO (verde): La alimentación CA está conectada al sistema.
  • Página 6 DECLARACIÓN DE PRIVACIDAD: La nube Tyco recopila los siguientes datos del panel iotega (dirección IP pública, eventos y estados de seguridad, configuración de seguridad y los diagnósticos del sistema) con el fin de [mejorar el rendimiento del sistema, solucionar los problemas de los clientes y mejorar la experiencia de usuario ]. Usted tiene el derecho a acceder, corregir y solicitar la eliminación de sus datos personales contactando a info@tycosecurityproducts.com y el derecho a presentar una queja ante una autoridad reguladora.