Iso Din Radio Provision With Pocket - Metra 99-2004 Instrucciones De Instalación

Cadillac DeVille 1996-1999
ISO Radio provision with pocket
1. Install (4) speed clips into the sub-dash
mounting positions. (Figure A)
2. Remove mounting brackets "A" from
the radio housing. (Figure B)
3. Align the holes from the ISO snap in
brackets with the holes in the side of
the radio and mount the brackets to the
radio using screws supplied with the
radio. (Figure C)
4. Slide the radio bracket assembly into
the radio housing until the assembly
snaps into place. Snap the ISO trim
plate over the unit. (Figure D)
5. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
6. Reassemble dash in reverse order
of disassembly.
(Figure A)
Kit Assembly 99-2004
8
(Figure B)
(Figure C)
(Figure D)
TWO ON EACH SIDE
OF RADIO HOUSING