Kit Assembly; Cadillac Catera 1997-2001; Din Radio Provision With Pocket - Metra 99-2004 Instrucciones De Instalación

Cadillac Catera 1997-2001

DIN Radio provision with pocket

1. Remove (2) tabs from the top edge of
the radio housing. (Figure A)
2. Remove both mounting brackets "B"
from the radio housing. (Figure B)
3. Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs outward. (Figure C)
4. Slide the radio into the DIN cage/
housing assembly until it snaps into
place. (Figure D)
5. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
6. Reassemble dash in reverse order
of disassembly.
(Figure A)

Kit Assembly 99-2004

5
(Figure B)
(Figure C)
(Figure D)
TWO ON EACH SIDE
OF RADIO HOUSING