Kit Assembly - Metra 95-3527 Instrucciones De Instalación

ISO DDIN radio provision
1. Snap the ISO DDIN brackets to the inside
edge of the radio housing. (Figure A)
2. Slide the radio into the bracket/radio
housing assembly and secure using the
screws supplied with the radio. (Figure B)
3. Snap the ISO DDIN trim plate onto the front
of the housing/radio assembly. (Figure B)
4. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio and climate controls. Metra
recommends using the proper mating
adapter from Metra or AXXESS. Test the
radio for proper operation.
5. Reassemble the dash in reverse order of
disassembly.
95-3527

Kit Assembly

(Figure A)
(Figure B)
3