Iso Ddin Radio Provision - Metra 99-8151 Instrucciones De Instalación

ISO DDIN radio provision

1. Attach the spacer brackets to the
mounting brackets. (Figure A)
2. Slide the radio between the
spacer/bracket assembly and align
it with the with the holes in the
radio. Secure it to the assembly
using the screws supplied with the
radio. (Figure B)
3. Snap the ISO DDIN trim plate onto
the front of the radio housing trim
panel. (Figure C)
4. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio and climate
controls. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the radio for proper operation.
5. Reassemble the dash in reverse
order of disassembly.
Kit Assembly
(Figure A)
99-8151
(Figure B)
7
(Figure C)