Batteries - Clarity The Talking Phone JV35 Manual Del Usuario

Installation
3. Plug in the short phone
cord.
4. Insert the AC Adapter
cord into the receptacle
on the back of the
JV35. Then plug the
AC Adapter into an
electrical outlet.
Fig. 6 - Wall mounting
installation
5. Align the posts on the
wall mount with the
holes in back of the
JV35. Slide the phone
down on the posts to
secure it.
6. Lift the handset and
listen for a dial tone.
7. Your JV35 is ready to
use.
C. Batteries
During a power outage, the JV35
will maintain full function if
back-up batteries have been
installed in advance. If batteries
are not installed during a power
outage, the BOOST button, the
voice announcements and the
Ring Flasher will not work.
Note: A set of new batteries can
last up to 100 hours during a
power outage.
Install four AA alkaline
batteries. (Batteries not included.)
Use alkaline batteries only.
E
N
G
L
I
S
H
5