Date And Time; Screen Brightness - Orion QuikRead go Instrucciones De Uso

Date and time

The second step presented by the set-up wizard is
to adjust the date and time. To do this, follow the
instructions below:
1. Choose Edit on the Time row
2. Adjust the time with the arrow buttons
3. Choose between a 12-hour and 24-hour clock
4. Accept the selection by choosing OK
5. Choose Edit on the Date row
6. Indicate the date with the arrow buttons
7. Select a date format
8. Accept by selecting OK
9. Select Next to continue
10. Choose Next

Screen brightness

The third step in the set-up process is to adjust
screen brightness. To do this, follow the instructions
below:
1. Adjust the screen's brightness level with the
arrow buttons.
2. Accept the selection by choosing Next.
14
INSTALLATION PROCEDURES AND REQUIREMENTS
Set-up
Time:
10:30 am
Date:
2014-05-03
Edit time and date. The instrument does not automatically
take daylight saving time into account but it should be
adjusted manually.
Back
Image 12
The second step presented by the set-up wizard is
to adjust a time and date for the instrument.
LIS ON 10:30
DATE & TIME
Edit
Edit
Next