Personal Settings - Orion QuikRead go Instrucciones De Uso

Personal settings

From Personal settings, the operator can set lan-
guage, screen, volume, and power-saving options.
These can be chosen for temporary use (that is, un-
til powering down of the instrument) or for further
use, in which case the settings need to be saved to
a profile. Settings for continuous use should be con-
figured with the set-up wizard: Settings > Measure-
ment flow > Maintenance > Basic settings.
Language
The language is selected with the set-up wizard.
From here, it is possible to change the language
by choosing Language and then selecting the
desired language. Accept the selection with Yes, or
reject it with No.
Screen
Screen brightness can be adjusted from Screen. To
increase or decrease the brightness of the screen,
use the arrow buttons. Accept with OK, or reject by
selecting Cancel.
Volume
Sound volume can be adjusted from Volume.
Adjust the keypad tone volume and the alert tone
volume by using the arrow buttons. Accept the se-
lection with OK, or reject it with Cancel.
PROFILE
Settings
Modify personal settings. Changes in measurement flow
and personal settings can be saved as a profile.
Cancel
Image 16
The Personal settings menu
PERSONAL SETTINGS
Language
Screen
Volume
Power save
Measurement flow
PRINCIPLES OF OPERATION
LIS ON 10:30
Save
19