Imetec TITANOX Manual Del Usurario página 22

GB
temperature control knob (2) [Fig. D].
If the selected temperature is too low, small drops of water may fall off the plate.
: during ironing, the plate temperature control light (1) comes on at intervals,
indicating that the selected temperature is maintained.
Press the super-steam button (4) [Fig. E] to generate a powerful shot of steam that can
penetrate fabrics and smooth even the toughest creases.
Wait for a few seconds before pressing again [Fig. E] .
By pressing the super-steam button (4) at intervals you can also iron vertically (curtains,
hung garments, etc.) [Fig. F].
: The super-steam function can only be used at high temperatures.
Stop the emission when the plate temperature control light (1) comes on, then start ironing
again only when the light goes off.
Make sure that there is water in the tank (10).
Press the spray button (3) slowly (for a dense spray) or quickly (for a vaporized spray) [Fig. G].
: dampen delicate fabrics beforehand using the spray function (3), or place a damp
cloth between the iron and the fabric.
Do not use the spray on silk or synthetic fabrics.
Disconnect the plug (13) from the socket.
Empty the water tank (10) by turning the iron upside down and gently shaking it.
Leave the iron to cool down completely.
Wrap the cord round its wind (11) [Fig. H].
Always put the iron away in a vertical position.
16
MI000402_E2401_internaz2.indd 16 26/02/11 10.50