Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Impurities coming
out of the steam
vents stain
garments.
Water comes out
of the plate.
The product packaging consists of recyclable materials. Dispose of these in an
environmentally appropriate manner.
In accordance with EU directive 2002/96/EC, the appliance must be disposed of
properly at the end of its service life. This involves the recycling of valuable substances
contained within the appliance and reduces the impact on the environment. For more
information, contact your local disposal company or the store where you purchased
the appliance.
For further information on repairs or new spare parts, please contact an authorised IMETEC
service centre using the free phone number below or by visiting our website. A manufacturer
warranty is provided for the appliance. Details can be found on the enclosed warranty sheet.
Failure to comply with the use and maintenance instructions provided in this user manual
will invalidate all and any rights to the manufacturer's warranty.
Tenacta Group S.p.A. Via Piemonte 5/11 24052 Azzano S. Paolo (BG) ITALY
18
MI000402_E2401_internaz2.indd 18
Possible residue in the
steam/plate chamber.
You are using chemical
additives, scented
substances or
descalers.
You are using pure
distilled or softened
water.
You are using starch
Plate temperature
is too low due to too
frequent use of the
Super-steam button.
The temperature
control knob (2) is
set on the minimum
temperature Ø (Fig D).
www. imetec.com
Tel. +39.035.688.111 Fax +39.035.320.149
Carry out self-cleaning (see paragraph
Self Clean/Calc Clean)
Using such substances can damage
the product: do not add additives to the
water in the tank.
Mix tap water (50%) with distilled and/
or demineralised (50%);
Always spray starch on the wrong side
of fabrics.
Slightly increase the time between jets
of steam.
Move the temperature control knob (2)
to a higher temperature.
26/02/11 10.50
Publicidad
