Publicidad
Idiomas disponibles
Idiomas disponibles
Any deposits, starch residue or size left on the plate can be removed using a damp cloth
and a non-abrasive liquid detergent.
Avoid scratching the plate with steel wool or metallic objects.
The plastic parts can be cleaned with a damp cloth then wiped over with a dry cloth.
The most common problems related to appliance use will be discussed in this chapter. If
you are not able to solve the problems with the following information, please contact the
Authorised Service Centre.
Problem
The plate stays cold
or does not heat up.
The plate
temperature control
light turns
Only small
quantities of steam
or none at all come
out.
MI000402_E2401_internaz2.indd 17
Possible causes
There is no power.
Normal procedure.
The steam selector is
on the Ø position.
There isn't enough
water in the tank.
The Anti-Drip function
is activated.
Solution
Check that the plug is correctly inserted
or try to insert it in another socket.
Make sure that the temperature control
knob (2) is not set on the minimum
temperature Ø (Fig D).
indicates the iron is in the heating
phase. As soon as it reaches the set
Move the steam indicator to the desired
area (Fig B).
Fill the tank.
Wait until the plate has reached the
correct temperature again.
GB
17
26/02/11 10.50
Publicidad
