Safety Information; Electrical Connection; Safe Operation - Oase BioTec ScreenMatic2 Serie Instrucciones De Uso

Ocultar thumbs Ver también para BioTec ScreenMatic2 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 67
- EN -
Translation of the original Operating Instructions
1

Safety information

This unit can be used by children aged 8  and above and by per-
sons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they are supervised or have
been instructed on how to use the unit in a safe way and they
understand the hazards involved.
Do not allow children to play with the unit.
Only allow children to carry out cleaning and user maintenance
under supervision.
1.1

Electrical connection

• Electrical installations must meet the national regulations and may only be carried out by a qualified electri-
cian.
• A person is regarded as a qualified electrician if, due to his/her vocational education, knowledge and experi-
ence, he or she is capable of and authorised to judge and carry out the work commissioned to him/her. This
also includes the recognition of possible hazards and the adherence to the pertinent regional and national
standards, rules and regulations.
• For your own safety, please consult a qualified electrician.
• Only connect the unit if the electrical data of the unit and the power supply coincide. The unit data is to be
found on the unit type plate, on the packaging or in this manual.
• Ensure that the unit is fused for a rated fault current of max. 30 mA by means of a fault current protection
device.
• Extension cables and power distributors (e.g. outlet strips) must be suitable for outdoor use (splash-proof).
• Protect the plug connections from moisture.
• Only plug the unit into a correctly fitted socket.
1.2

Safe operation

• Dangerous electrical voltage. Possible death or severe injury from electrocution! Before reaching into the
water, always switch off and disconnect (isolate) all units located in the water with a voltage of >12 V AC or
>30 V DC and secure them from being switched on again.
• Never operate the unit if either the electrical cables or the housing are defective!
• Do not carry or pull the unit by its electrical cable.
• Route cables/hoses such that they are protected from damage and do not present a tripping hazard.
• Only open the unit housing or its attendant components, when this is explicitly required in the operating in-
structions.
• Only carry out work on the unit that is described in this manual. If problems cannot be overcome, please
contact an authorised customer service point or, when in doubt, the manufacturer.
• Only use original spare parts and accessories for the unit.
• Never carry out technical modifications to the unit.
• Power connection cables cannot be replaced. If a cable is damaged, dispose of the respective unit or com-
ponents.
26

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Biotec screenmatic2 40000Biotec screenmatic2 60000Biotec screenmatic2 140000

Tabla de contenido