Danfoss FC 300 Guía De Programación página 149

Descripciones de parámetros
13-44 Logic Rule Boolean 3
Matriz [6]
Option:
[37] Digital input DI32
[38] Digital input DI33
3 3
[39] Start command
[40] Drive stopped
[41] Reset Trip
[42] Auto-reset Trip
[43] Ok key
[44] Reset key
[45] Left key
[46] Right key
[47] Up key
[48] Down key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL Time-out 3
[71] SL Time-out 4
[72] SL Time-out 5
[73] SL Time-out 6
[74] SL Time-out 7
[75] Start command given
[76] Digital input x30/2
[77] Digital input x30/3
[78] Digital input x30/4
[79] Digital input x46/1
[80] Digital input x46/3
[81] Digital input x46/5
[82] Digital input x46/7
[83] Digital input x46/9
[84] Digital input x46/11
[85] Digital input x46/13
[90] ATEX ETR cur. warning
[91] ATEX ETR cur. alarm
[92] ATEX ETR freq. warning Seleccionable si 1-90 Motor
[93] ATEX ETR freq. alarm
148
Guía de programación del FC 300
Función:
Seleccionable si 1-90 Motor
Thermal Protection está ajustada
en [20] o [21]. Si la alarma 164
ATEX ETR alarma lím.int. está
activa, la salida será 1.
Seleccionable si 1-90 Motor
Thermal Protection está ajustada
en [20] o [21]. Si la alarma 166
ATEX ETR alarma lím.frec. está
activa, la salida será 1.
Thermal Protection está ajustada
en [20] o [21] ]. Si la alarma 163
ATEX ETR advertencia lím.int. está
activa, la salida será 1.
Seleccionable si 1-90 Motor
Thermal Protection está ajustada
en [20] o [21]. Si la alarma 165
®
MG33MD05 - VLT es una marca registrada de Danfoss.
13-44 Logic Rule Boolean 3
Matriz [6]
Option:
[94] RS Flipflop 0
[95] RS Flipflop 1
[96] RS Flipflop 2
[97] RS Flipflop 3
[98] RS Flipflop 4
[99] RS Flipflop 5
[100] RS Flipflop 6
[101] RS Flipflop 7
3.14.7 13-5* Estados
13-51 SL Controller Event
Matriz [20]
Option:
[0] False
*
[1] True
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current limit
[7] Out of current range
[8] Below I low
[9] Above I high
[10] Out of speed range
[11] Below speed low
[12] Above speed high
[13] Out of feedb. range
[14] Below feedb. low
[15] Above feedb. high
[16] Thermal warning
[17] Mains out of range
[18] Reversing
[19] Warning
[20] Alarm (trip)
[21] Alarm (trip lock)
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
Función:
ATEX ETR advertencia lím.frec.
está activa, la salida será 1.
Función:
Seleccione la entrada booleana
(VERDADERO o FALSO) para
definir el evento de Smart Logic
Controller. Véae 13-01 Start Event
([0] - [61]) y 13-02 Stop Event ([70]
- [74]) para obtener una
descripción más detallada.