Nuova Simonelli MICROBAR Instrucciones De Manejo página 64

14. CLEAN WARNING
Press the ENTER key to access the submenu.
This allows you to program the number of
cycles after which the group clean warning will
be displayed.
The arrow keys increase/decrease the amount
of cycles for the display of the group clean warning
message. Press the RESET key to exit the submenu
and go back to the main menu and to confirm the
number of cycles programmed.
The ENTER key is disabled.
15. GROUP 1 ADJUSTMENT
Pressing the ENTER key, the sub-menu can
be entered.
The number of ENCODER impulses is pro-
grammed because the infusion chamber rea-
ches the stand-by position.
The ▲▼ keys increase/decrease the number of
ENCODER impulses.
The RESET key is used to exit from the sub-menu
to return to the main menu with confirmation of the
set value.
The ENTER key is disenabled.
NOTE: It is recommended to vary the setting only in
the case in which the original reduced gear
is substituted for a different type.
16. GROUP 2 ADJUSTMENT
Pressing the ENTER key, the sub-menu can
be entered.
The number of ENCODER impulses is pro-
grammed because the infusion chamber rea-
ches the upper position (chamber closed).
The ▲▼ keys increase/decrease the number of
ENCODER impulses.
The RESET key is used to exit from the sub-menu
to return to the main menu with confirmation of the
set value.
The ENTER key is disenabled.
NOTE: It is recommended to vary the setting only in
the case in which the original reduced gear
is substituted for a different type.
62
17. GRINDER SETTING
Press the ENTER key to access the submenu.
This allow you to program the choice of incre-
asing grinding times by 0.1 seconds every
250-1000 deliveries.
By setting the program at 0, the function is
disabled
The arrow keys increase/decrease the number
of deliveries, after which there will be an increase in
grinding time.
The available values are 0, 250,500, 750, 1000.
Press the RESET key to exit the submenu and go
back to the main menu and to confirm the number of
deliveries programmed.
The ENTER key is disabled
18. COFFEE TEMPERAT.
Press the ENTER key to access the submenu.
This allow you to program the temperature of
the coffee heater.
The arrow keys increase/decrease the tempe-
rature of the coffee heater.
La temperatura massima impostabile è 105°C
(221°F).
Press the RESET key to exit the submenu and go
back to the main menu and to confirm the tempera-
ture programmed.
The ENTER key is disabled.
19. STEAM TEMPERAT.
Press the ENTER key to access the submenu.
This allow you to program the temperature of
the steam boiler.
The arrow keys increase/decrease the tempe-
rature of the steam boiler.
La temperatura massima impostabile è 130°C (266°F).
Press the RESET key to exit the submenu and go
back to the main menu and to confirm the temperature
programmed.
The ENTER key is disabled.
20. TOTAL COUNT 1
(only in the version with a double grinder)
Pressing the ENTER key, the sub-menu can
be entered.
The number of cycles effectuated for each
drink key is visualised, following the use of the
right grinder.
EN