NPE Standard Repair Parts List
Item
Description
No.
100
Casing
101
Impeller
108A
Motor adapter with foot
108B
Motor adapter less foot
108C
Motor adapter with foot and Flush
108D
Motor adapter less foot with Flush
123
Deflector
184A
Seal housing std.
184B
Seal housing with seal flush
Motor support
240
Rubber channel
304
Impeller locknut
347
Guidevane
349
Seal-Ring, guidevane
370
Socket head screw, casing
371
Bolts, motor
383
Mechanical seal
408
Drain and vent plug, casing
412B
O-Ring, drain plugs
513
O-Ring, casing
NOTE: OPTIONAL SEAL FLUSH COMPONENTS
This warranty applies to all water systems pumps manufactured by Goulds Pumps.
Any part or parts found to be defective within the warranty period shall be replaced at no charge to the dealer during the warranty period. The warranty period shall exist
for a period of twelve (12) months from date of installation or eighteen (18) months from date of manufacture, whichever period is shorter.
A dealer who believes that a warranty claim exists must contact the authorized Goulds Pumps distributor from whom the pump was purchased and furnish complete details
regarding the claim. The distributor is authorized to adjust any warranty claims utilizing the Goulds Pumps Customer Service Department.
The warranty excludes:
(a) Labor, transportation and related costs incurred by the dealer;
(b) Reinstallation costs of repaired equipment;
(c) Reinstallation costs of replacement equipment;
(d) Consequential damages of any kind; and,
(e) Reimbursement for loss caused by interruption of service.
For purposes of this warranty, the following terms have these definitions:
(1) "Distributor" means any individual, partnership, corporation, association, or other legal relationship that stands between Goulds Pumps and the dealer in purchases,
consignments or contracts for sale of the subject pumps.
(2) "Dealer" means any individual, partnership, corporation, association, or other legal relationship which engages in the business of selling or leasing pumps to customers.
(3) "Customer" means any entity who buys or leases the subject pumps from a dealer. The "customer" may mean an individual, partnership, corporation, limited liability
company, association or other legal entity which may engage in any type of business.
Goulds Pumps and the ITT Engineered Blocks Symbol are registered
trademarks and tradenames of ITT Industries.
Visit us at www.goulds.com
© 2002 Goulds Pumps
Printed in USA
4
Materials of
Construction
AISI 316L
Stainless Steel
BUNA-N
AISI 316L S.S.
300 S.S.
Rubber
AISI 316 S.S.
AISI 316L S.S.
Viton Standard
EPR
BUNA
AISI 410 S.S.
Steel/plated
AISI 316 S.S.
Viton, standard
EPR
BUNA
Viton, standard
EPR
BUNA
GOULDS PUMPS LIMITED WARRANTY
THIS WARRANTY EXTENDS TO THE DEALER ONLY.
Item 383 Mechanical Seal (
Rotary
Stationary
Elastomers
Carbon
Sil-Carbide
Sil-Carbide
NOTE: Close coupled units supplied with
1750 RPM,
utilize motor adapter less foot and a footed motor.
NOTE: Frame mounted units (NPE-F) utilize the XS Power frame and
motor adapter less foot. For repair parts for the power frame refer to
the XS-Power frame repair parts page in the parts section of your
catalog. To order the power frame complete order item 14L61
5
⁄
" seal)
8
Metal Parts
Part No.
EPR
10K18
Viton
10K55
316SS
EPR
10K81
Viton
10K62
1
/
- 3 HP Explosion Proof or 5 HP motors,
2
1
/
HP
2