Changing The Language Setting - Alpine DVA-5200 Manual De Operación

Changing the lan-
guage settings
The audio language, subtitle language and
menu language can be set according to your
preferences.
Select "LANGUAGES" under
"Changing the default settings
(SET UP)" on page 26.
Use the " 8 " or " 9 " key
to make the selection,
then press "ENTER".
AUDIO
Set the audio language produced from
the speakers.
SUBTITLE
Set the language of the subtitles dis-
played on the screen.
MENU LANGUAGE
Set the language used for the menus (title
menu, etc.).
The setup screen for the selected
language is displayed.
Changing the language settings
or
ENTER
Notes:
• If the disc does not include the selected
• Languages set upon shipment from the factory:
AUDIO
(audio languages)
• Press "RETURN" to return to the previous screen.
SUBTITLE
(subtitle languages)
ORIGINAL
The disc is played with the audio
language set as the priority language for
the disc. (AUDIO only)
AUTO
The disc is played with the subtitle
language set as the priority language for
the disc. (SUBTITLE only)
OTHERS
Set this to play the disc with a language
other than one of the languages dis-
played. Use the keys "0" to "9" to input
the 4-digit country code, then press
"ENTER". For the country codes, refer to
"List of language codes" (page 57).
Use the " 8 " or " 9 " key to select
the desired language, then press
"ENTER".
or
language, the disc's default language is set.
Audio language : ORIGINAL
Subtitle language : AUTO
Menu language : English
Press "SET UP".
The settings are stored and the
set up mode is canceled.
SET UP
MENU
LANGUAGE
(menu languages)
SET UP
ENTER
SET UP
27