Alpine DVA-5200 Manual De Operación página 21

Editing programs and clearing steps from programs
Press "ENTER".
The chapter number is selected.
Input the new chapter number,
then press "ENTER".
To continue editing, use the " 8 "
and " 9 " keys to select the number
of the step you want to edit, then
repeat steps 3 and 4.
Press " : ".
Programmed playback begins.
Note: For video CDs and CDs, edit the track
numbers (in the same way as for DVDs).
Clearing steps from programs
ENTER
During programmed
playback, press " L ".
The program menu appears.
or
Use the " 8 " or " 9 " key to select
the number of the step you want
to clear.
Press "CLEAR".
The step is cleared from the
program.
Notes:
• Clear one step from the program at a time.
• When a step is cleared, the numbers of the
following steps are all decreased by one.
• To clear the entire program, set the cursor to step
1 and press "CLEAR" repeatedly.
Press "PROG".
The program menu turns off.
or
CLEAR
PROG
21