Adjusting The Surround Settings - Alpine DVA-5200 Manual De Operación

Adjusting the surround settings

ENTER
A.PROC
38
Adjusting the sur-
round settings
This adjustment is not possible when Dolby
Digital or Pro Logic is turned on for the DVA-
5200's audio output.
Select "SURROUND" under
"Operating the digital audio
processor (optional)" on page 36.
Use the " 8 " or " 9 " key to select
the surround mode, then press
"ENTER".
There are six surround modes.
RETURN
Press "ENTER".
The level (LV) value turns yellow.
Use the " 8 " or " 9 " key to adjust
the level (LV), then press "EN-
TER".
Press " : " to select the time (echo
time), then press "ENTER".
or
or
ENTER
ENTER
ENTER
ENTER