Loading Batteries In The Remote Control Unit; Replacing The Battery; Closing The Cover - Alpine DVA-5200 Manual De Operación

Loading batteries in the remote control unit

Loading batteries in the remote control unit
1
Opening the battery cover
Press lightly on the arrow on the lid and pull upward.
2

Replacing the battery

Put the batteries in the case as illustrated.
3

Closing the cover

Push the cover as illustrated until a click is heard.
Note: Use two AA size butteries.
Caution
• Point the remote control at the remote sensor within about 2 meter.
• It may not be possible to operate the remote control unit if the remote control sensor
is exposed to direct sunlight.
• The remote control is a small, light weight precision equipment. To avoid damage,
early battery wearing, operations error and deterioration of operation feeling, take
care of the followings.
- Do not apply any shock.
- Do not put in a trouser pocket.
- Keep free from splashing of a drink, moisture and dusts.
- Do not place in direct sunshine.
Warning
DO NOT OPERATE THE EQUIPMENT OR LOOK AT THE SCREEN WHILE
DRIVING THE VEHICLE.
Operating the equipment may distract the driver from looking ahead of the vehicle
and cause accident. Always stop the vehicle in a safe location before operating
this equipment.
60
＋
−
−
＋