Custom Setting - Changing The F Scan Setting - Alpine DVA-5200 Manual De Operación

SET UP
Custom setting – Changing the F scan setting
Custom setting –
Changing the F scan setting
Use the following procedure to change the DVD
scan speed.
Select "CUSTOM SETUP" under
"Changing the default settings
(SET UP)" on page 26.
Use the " 8 " or " 9 " key to select
"F SCAN MODE", then press
SET UP
"ENTER".
ENTER
RETURN
or
ENTER
Use the " 8 " or " 9 " key to select
"IP FR" or "I FR", then press
"ENTER".
ENTER
or
RESET Switch
IP FR
The DVD scan speed is slightly slower than
when "I FR" is selected.
"IP FR" is selected upon shipment from the
factory.
I FR
The DVD scan speed is slightly faster than
when "IP FR" is selected.
Note: Press "RETURN" to return to the previous
screen.
Press "SET UP".
SET UP
The settings are stored and the
set up mode is canceled.
34