Mode - Adjusting The Volume, Fader And Balance - Alpine DVA-5200 Manual De Operación

MODE – Adjusting the volume, fader and balance
Use the " 8 " or " 9 " key to
select the speaker, then press
"ENTER".
Adjust so that the volume level from the
different speakers is the same.
or
Use the " 8 " or " 9 " key to
adjust the level, then press
"ENTER".
or
Note: Press "RETURN" to return to the previous
screen.
Once the levels of all the
speakers have been
adjusted, either set
"TEST TONE" to "OFF"
or press "A.PROC" to
close the digital audio
processor screen and
return to the playback
screen.
ADJUST – Adjusting the speaker level
ENTER
ENTER
A.PROC
MODE –
Adjusting the volume,
fader and balance
When a head unit is connected using Ai-NET
connections, adjust the volume, fader and
balance from the head unit.
Select "MODE" under "Operating
the digital audio processor
(optional)" on page 36.
Use the " 8 " or " 9 " key to select
the item to be adjusted, then press
"ENTER".
or
Use the " 8 " or " 9 " key to
adjust.
Note: Press "RETURN" to return to the previous
screen.
Press "A.PROC" to
close the digital audio
processor screen and
return to the playback
screen.
DVD
Video CD
CD
ENTER
or
A.PROC
49