Battery Replacement - Megger PVM210 Guia Del Usuario

For a more accurate measurement at the optimum angle or position,
the universal camera mount on the rear of the meter may be utilised.
For easy reading the measurement on the meter can be retained on
the display by pressing the HOLD button.
Press this button once again to deactivate the hold feature.
The over range indicator ' OL' may appear on the display when
measurements exceed 199.9
The RANGE button can then be used to extend possible readings
beyond 199.9 up to 1999
x
To switch the PVM210 off press the power button .

Battery replacement

When the symbol is displayed, the batteries require replacement.
To change batteries turn off the meter and carefully slide off the
battery cover on the rear of the meter.
Remove depleted batteries and dispose of correctly.
Insert a new batteries of the same type (2 x 1.5V AAA MN2400 LR03)
observing the proper polarity.
Carefully replace battery cover.
The instrument is now ready to use.