Schubert SR1 Manual De Instrucciones página 18

D. the helmet
2. Pull the strap tight. The
chinstrap should be taut but not
uncomfortable. Then feed the free
end of the strap back through the
first ring of the fastener.
Tip:
To ensure the correct position we recommend that you grasp
the helmet by the sides with both hands and use gentle
rotating movements on the head, and then pull the chinstrap
tight again.
3. The free end of the strap is tucked
away and fastened by means of
the snap. This prevents the strap
from flapping in the wind.
Loosening and opening
1. Release the snap and pull on the
little red lug of the double-D
fastener so that the strap is
loosened.
2. Now thread the free end of the
chin strap out of the double-D
fastener.
Warning:
Never ride without ensuring that the chin strap is properly
fastened, correctly adjusted and in the right position. If the
chin strap is not properly adjusted or fastened, it is possible
that in the event of an accident the helmet could come loose
from your head.
18