Checking The Face Shield - Schubert SR1 Manual De Instrucciones

Warning:
Never ride with the chinstrap unfastened or incorrectly
adjusted. The chinstrap should fit correctly and should not
become loose when pulled. The fastener is not correctly
closed if the chinstrap becomes loose when pulled.
3. CHECKING THE FACE SCHIELD
Before every ride, check that the visor is fit for function and that it
offers sufficiently good vision. Remove dirt before riding (see 'Face
Shield', section H.2).
Check the visor for mechanical damage and/or cracks. A badly
scratched Face Shield is detrimental to vision and must be replaced
before riding.
Warning:
Scratched and/or dirty visors interfere seriously with vision.
Change or clean the visor for your safety.
Warning:
Ensure that the visor is always in good condition. Damaged
visors are not safe for riding and should be replaced.
Warning:
If visability is poor, stop riding.
Caution:
Never use tinted Face Shields in conditions of poor visibility,
when riding at night or in a tunnel.
37