Schubert SR1 Manual De Instrucciones página 8

C. reAD first
Warning:
Never modify your helmet!
It is very dangerous to drill holes or to cut the shell and/
or the shock absorbing liner. Modification can seriously
weaken the helmet. Modifying the retention system
weakens it, increasing the likelihood of snapping during
impact. Removing parts such as the mouth guard or rubber
face molding can expose edges that may injure you in
an accident. Always use approved SCHUBERTH parts when
replacing shields, screws, or any other parts. A weakened
helmet will not provide head protection.
Warning:
Don't mistreat your helmet!
Never ride with the helmet hanging from the helmet holder,
and do not hang the helmet from angled supports such as
a mirror. Do not sit on or throw your helmet. You should
not expose the liner of your helmet to strong sunlight and
excessive heat such as near heaters or where temperatures
exceed 50 °C (122 °F). Avoid spraying insect repellent chemicals
(such as 'naphthalene') near the helmet. Mistreating your
helmet will damage the shell and impact absorbing liner,
reducing the helmet's ability to protect you in an accident.
Warning:
Clean your helmet carefully!
Only use lukewarm tap water, never benzene, gasoline,
glass cleaner or other solvents. Your helmet can be seriously
damaged by these substances without visible damage. A
helmet damaged or weakened by a cleaning agent may not
provide head protection in an accident, resulting in serious
personal injury or death.
8