Inner Lining - Schubert SR1 Manual De Instrucciones

D. the helmet
Caution:
Gasoline, solvent and fuel vapours can cause cracking of the
Face Shield. Make sure that the Face Shield is never exposed
to such vapours! Never place the helmet on the tank of your
bike.

12. INNER LINING

The washable, replaceable inner lining of the SR1 offers not only a
superb shape but also improved entry and exit of air to and from
the helmet.
The cheek comfort padding and ear pads provide soft cushioning
to the cheeks and the headband cushion offers good positioning
around the head. The central head pad ensures comfortable fitting
to the head while ensuring that the air channels do not become
blocked (see Ventilation systems/Head ventilation, section D.13).
The inner lining consists of skin-friendly materials throughout,
particularly in areas that come in contact with the head. These
are a soft, breathable COOLMAX
moisture very well, a special noise-reducing Polygene
with antibacterial properties and a sweat-absorbing Interpower
material.
REMOVING THE INNER LINING
The inner lining is affixed to the inner shell of the helmet by
means of a clamp fastening. It can be removed by pulling it gently
out.
26
®
material that transports heat and
®
material
®