Inner Lining; Fastening System; Storage - Schubert SR1 Manual De Instrucciones

Inside surface of the Face Shield
The inside surface of the Face Shield must only be cleaned with
a soft cloth, which may be slightly dampened if required (we
recommend a mocrofibre cloth). Do not use any cleaning agents.
Note:
Only use warm water (< 70 °F) for cleaning. Never on any
account clean the Face Shield or sun visor with gasoline,
solvent, a window or glass cleaner or other cleaning agents
containing alcohol.

3. INNER LINING

The headband cushion, the cheek comfort pads and the ear pads
can be hand-washed using a mild detergent (best if well diluted
with water) at a maximum temperature of 80 °F. Allow damp
linings to dry at room temperature in airy conditions.

4. FASTENING SYSTEM

The double-D fastening system is maintenance-free.
Warning:
Do not oil or grease the metal parts of the double-D fastener.

5. STORAGE

Store the helmet in the pouch provided in a safe, dry place. To
avoid buildup of moisture inside and to prolong the life of the
anti-fog coating, ensure that the visor is not completely closed.
Ideally it should be set to the 2nd position above the urban mode
setting. Always place the helmet so that it cannot fall onto the
floor.
Note:
Keep the helmet out of reach of children and animals.
45