Pushbuttons - Fluke 1550C Manual Del Usurario

1550C/1555
Users Manual

Pushbuttons

Use the pushbuttons to control the Tester, view test results, and scroll through
chosen test results. Pushbuttons and their functionality are discussed in
Figure 2.
1
Item
Turns the Tester off and on.


Push
Function menu. To scroll within the Function menu, use the arrow

pushbuttons.
Scrolls through test voltages, stored test results, timer duration, and
 changes test tag ID characters. Also used to answer "yes" to yes/no
prompts.
After a memory location is set,
test results stored in memory. These include voltage, capacitance,

polarization index, dielectric absorption ratio, and current.
Use to scroll through test voltages, stored test results, timer
duration, and memory locations. Also used to answer "no" to yes/no

prompts.
Use for Test Voltage mode to start incrementally setting the test

voltage between 250 V and 10,000 V.
Starts and stops a test. Push and hold for 1 second to start a test.

Push again to stop a test.
8
FUNCTION
2 3
to go to the Function menu. Push again to exit the
Figure 3. Pushbuttons
4 5
Description

displays the test parameters,
ENTER
TEST
6 7
Ghh02.eps