Download Results To Pc; Delete Test Results - Fluke 1550C Manual Del Usurario

1550C/1555
Users Manual

Download Results to PC

Before the USB-IR cable can be used, software drivers must be
installed on your Windows PC. See the USB-IR Installation Guide for
more information.
To connect the Tester to the PC for use with FlukeView Forms Basic
Documenting Software:
The Tester should not be running a test; otherwise, serial communications will
be disabled.
1. Connect the USB-IR cable to an available USB port on the PC.
2. Attach the IR device to the IR port on the Tester.
3. Open FlukeView Forms Basic Documenting Software.
4. The current COM serial port setting is displayed at the bottom right of the
FlukeView Forms Basic window. Double-click on it to change the COM
port setting to the virtual COM port used by the USB-IR cable.
5. Turn the Tester on.
6. Follow the instructions for transferring data from the Tester to the PC
found in the online FlukeView Forms Users Manual.
Verify that the download was successful before deleting the stored
test results on the Tester.
Results data stored in the Tester can be deleted from the PC using the
FlukeView Forms Basic application. See the FlukeView Forms Users
Manual file for details.

Delete Test Results

To delete all saved test results:
1. Push  to call the Function menu.
2. Push  or  to select the menu item DELETE RESULT.
3. Push  to call the menu item.
4. Push . REALLY DEL? Appears.
5. Push  to confirm the deletion or push  to return to Test Voltage.
26
Note
Note
Note