Skylark 1987-1989 - Dynex DX-G1113 Guia Del Usuario

18
Buick

Skylark 1987-1989

To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Unsnap the gear shift bezel from the base of the console. Remove the two screws that
secure the bottom of the dash trim bezel, then remove the bezel.
3 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
4 Go to "Completing the installation" on page 76.
2
S10 shown
as example
Installing your car stereo