Installing your car stereo
Chevrolet
Lumina APV 1990-1995
Oldsmobile
Silhouette 1990-1995
Pontiac
TransSport 1990-95
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the two screws that secure the lower steering column panel, then remove it.
3 Remove the two exposed screws on the left tab of the radio trim bezel.
4 Open the glove box, then remove the two exposed screws on the right tabs of the radio
trim bezel.
5 Cut and remove all mounting tabs on bracket 6 except the B tabs. Each mounting tab
has a letter stamped on the back of the tab. Cut the tabs with the blade pointed away
from you and your fingers.
6 Go to "Completing the installation" on page 76.
B
B
45