Completing The Installation - Dynex DX-G1113 Guia Del Usuario

76

Completing the installation

For all vehicles, perform the following steps to complete your car stereo installation.
Installing the faceplate
To install the faceplate:
1 Choose a faceplate (according to the installation depth).
2 Snap the faceplate onto the front of the radio housing. (If an equalizer will be included
in the installation, the equalizer faceplate must be used).
I
3 If you are installing an equalizer, slide the equalizer brackets into the slots along the
inner walls of the radio housing.
Installing your car stereo