Cavalier 1991-1994 - Dynex DX-G1113 Guia Del Usuario

34
Chevrolet

Cavalier 1991-1994

To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Using a panel removal tool, carefully pry out the dash trim bezel, then remove it.
3 Remove the two screws that secure the factory head unit, then disconnect the wiring.
4 Cut and remove all mounting tabs on bracket 3 except the B tabs. Each mounting tab
has a letter stamped on the back of the tab. Cut the tabs with the blade pointed away
from you and your fingers.
5 Go to "Completing the installation" on page 76.
B
B
Installing your car stereo