Blazer (Full Size) 1988-1991; Suburban 1988-1991; Jimmy (Full Size) 1989-1991; Suburban 1989-1991 - Dynex DX-G1113 Guia Del Usuario

Installing your car stereo
Chevrolet

Blazer (full size) 1988-1991

Suburban 1988-1991

GMC

Jimmy (full size) 1989-1991

Suburban 1989-1991

To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the two screws from the radio trim bezel, then remove the bezel.
3 Remove the two screws that secure the factory head unit, then disconnect the wiring.
4 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
5 Go to "Completing the installation" on page 76.
2
S10 shown
as example
27