Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DUCTED INSTALLATION ONLY
1. Press the damper into the duct
connector on the hood. Fig. 12.
2. Run 6-inch diameter metal ductwork
to the outside location.
3. Install an appropriate wall or roof cap
with damper to exhaust the air to the
outside.
4. Tape all duct joints with aluminum
duct tape.
5. Plug power cord into wall outlet.
6. Install upper and lower decorative
flues onto the range hood. Fig. 13.
- Vents are concealed on 8-foot
ceilings.
- Vents are exposed on 9-foot
ceilings.
7. Secure upper flue to flue mounting
bracket with (2) 3.9 x 6 mm screws.
Fig. 14.
6-INCH DIA.
METAL DUCT
DAMPER
DUCT
CONNECTOR
FLUE
MOUNTING
BRACKET
- 11 -
POWER
CORD
FIG.12
VENTS
EXPOSED
VENTS
CONCEALED
FIG.13
3.9 x 6 mm
SCREWS
FIG.14
Publicidad
Tabla de contenido
