NON-DUCTED INSTALLATION
WITH FLUE
Note: Purchase Model ANKWC33 Non-
ducted Recirculation Kit
1. Do not install damper supplied with
the range hood.
2. Attach the 5" to 6" adapter to blower
discharge and tape joint with
aluminum duct tape. Fig. 15.
3. Install the plenum to the upper
decorative flue using (4) 3.4 x 15 mm
screws provided as shown. Fig. 16.
4. Attach 5-inch expandable ducting
to the plenum and tape joint with
aluminum duct tape. Fig. 17.
- 12 -
5" TO 6"
ADAPTER
FIG.15
3.4 x 15 mm
SCREWS
FIG.16
FIG.17