ADJUST HOOD HEIGHT
1. Loosen (3) screws on upper decora-
tive trim. Fig. 22.
2. Slide trim up to increase panel open-
ing from 13-3/4" to 14-3/8" .
3. Re-tighten (3) screws on upper deco-
rative trim.
ADJUST HOOD DEPTH
1. Loosen (2) screws on top of the range
hood housing. Fig. 23.
2. Slide the front hood panel forward
to increase hood depth from 13" to
14-1/2" .
3. Re-tighten (2) screws on the top of
the range hood.
INSTALL DECORATIVE
PANEL
Note: The custom panel and material
must comply with all local building
codes.
1. Cut 3/4" panel to fit the adjustable
range hood opening.
2. Fasten the panel to the range hoods
front panel with appropriately-sized
screws. Fig. 24.
3. Make sure the panel is properly se-
cured to the range hood after instal-
lation.
Note: Prefinished gloss black panel
Model ADPWC33B can be purchased
from your local dealer.
- 15 -
FIG.22
FIG.23
FIG.24