Feature; Devices Connectable; Water Pump (Ref. 11 On Pic. 4); Proportional Valve (Ref. 12 On Pic. 4) - Carrier 80HMA-9002 Manual De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46

Feature

Unit
Dimensions
Packing
Unit
Weight
Gross
Ambient
Operating Range
temperature range
Power supply
Electrical data
Operating voltage limits
Power consumption (only board)
Raccomanded
Pool kit with max power connectable devices

Devices connectable

Water Pump (ref. 11 on pic. 4)

Water pump, if connected, will be activated when the Pool
mode is on. It's possible to select the mode of the pool by:
User Interface
Dry Contact
Schedule
Pool kit can work without controlling the water pump.
When the water pump is mapped, it is On when pool mode
is not OFF. Depending on setting of Par. 11.2 and the Water
Pool Temperature, pump could be turned OFF even if pool
mode is not OFF.

Proportional Valve (ref. 12 on pic. 4)

Proportional valve is used to have a better temperature
control of the water provided to the pool.
If the temperature of the water supplied by the heat
exchanger is higher or lower than the requested one, the
control drives the valve to adjust it.
Pool kit
H (mm)
mm
W (mm)
mm
D (mm)
mm
H (mm)
mm
W (mm)
mm
D (mm)
mm
kg
kg
Heating and cooling
°C
Voltage
V
Frequency
Hz
Phases
V
W
Type
Some third part pool cleaning systems have their own water
pump directly controlled.
The Pool kit works checking the flow switch status,
independently from the control of water pump.
In order to manage the leaving temperature, the control also
operates on the temperature requested to the Comfort Module,
the proportional valve is suggested to increase the control
precision, and to avoid to supply too hot water in the pool.
If the proportional valve is installed, the Leaving Water
Temperature Sensor (ref. 9 pic. 4) must also be installed.
370
274
140
400
300
170
3
6
5÷30°C
230
50
1
207-253
10
C10
8
80HMA - 9002

Publicidad

Tabla de contenido
loading

Tabla de contenido